• <fieldset id="8amwy"><input id="8amwy"></input></fieldset>
    <ul id="8amwy"></ul>
    <ul id="8amwy"></ul>
  • Home > news > FAQ

    Fiber Laser Cutting Machine Daily Maintenance

    06 / 6 / 2022

    Fiber Laser Cutting Machine Daily Maintenance

    Cycle

    How to maintain

    Purpose

    Daily


    Clean up the dust and stains on the surface of the machine bed, laser heads, sensors and other components;
     

    Keep the overall appearance of the machine clean;
     

    Clean up cutting residues and flammable items on the machine table;
     

    Ensure the normal use of the machine table; prevent the occurrence of fire;
     

    Use an air gun to clean the dust or debris inside the front chuck
    holder and the rear chuck of the pipe cutting assembly;

     

    Ensure the normal use of the tube cutting chucks;
     


    Before starting the machine, check whether the air valve
    pressure is normal, and whether the wiring terminals inside the power distribution cabinet are tight;

     

    Avoid insufficient air pressure during the cutting process to affect the cutting quality; ensure that the machine is normally turned on and running;
     


    Check whether the air pipe and water pipe joints of the laser
    head are properly connected to ensure that there is no air leakage or water leakage;

     

    Ensure the normal supply of gas and cooling water during the cutting process;
     

    Weekly


    Clean the sundries and oil stains on the guide rails and rack surfaces of the X, Y, Z axes and the pipe cutting assembly, and add 32# engine oil for the transmission racks;
     

    Ensure the lubrication of the machine rack and pinion, prolong the service life of the guide rail and rack;
     


    Use dry and clean ordinary air inside the power distribution cabinet (air pressure lower than 0.2mpa, avoid blowing electrical components directly) to clean the internal dust;
     

    Ensure the cleanliness of the inside of the power distribution cabinet to avoid damage to electrical components;
     

    Clean up the oil or debris attached to the travel limit switches;
     

    Ensure the normal work of the machine limit switches;
     


    Clean and wipe the motor, check the terminals, and check whether the junction box wiring screws are loose or burnt out. If damaged, it should be replaced in time;
     

    Prevent leakage accidents;
     

    Remove dust and oil stains from the outside of the motor base;
     

    Keep the motor clean;
     

    Clean the filter of the chiller;
     

    Avoid poor heat dissipation and high temperature;
     

    Use the oil gun to fill the 32# oil at the oil nozzle position of the
    front and rear pneumatic chucks;

     

    Ensure the lubricating of the front and rear chucks;
     


    Disassemble and clean the dust and debris inside the exhaust
    fan;

     

    Ensure the normal use of the exhaust fan;
     

    Clean up the sundries or oil stains attached to the protective lens;
     

    to the protective lens; Ensure the normal laser output of the machine;
     

    Monthly



    Check the transmission parts, whether the coupling is damaged, whether the installation is firm, and whether the bearing is damaged. Generally, the bearing should be cleaned once after 3-6 months of use, and the grease should be replaced;

    Ensure the cutting accuracy of the machine and prolong its service life;
     


    Clean up the oil and debris attached to the pneumatic chucks and pneumatic jaws of the tube cutting assembly;
     

    Extend the life of the chucks;
     

    Quarterly


    Replace the cooling water of the chiller; in winter, you need to add antifreeze (industrial grade ethylene glycol, the ratio is 1:1).
     

    Ensure the cleaning and cooling effect of cooling water; prevent cooling water from freezing;



    Check all fixing screws, including anchor screws, end cap screws, bearing cap screws, etc., and tighten the loose screws;
     

    Ensure the cutting accuracy of the machine;

    Warning: To ensure personal safety, be sure to power off the machine during maintenance! If the machine fails, please communicate with the LaserMen after-sales.

    Contact Us

    name:

    E-mail:

    country:

    WhatsApp:

    message:

    主站蜘蛛池模板: 免费精品精品国产欧美在线欧美高清免费一级在线 | 久久精品成人一区二区三区| 久久ww精品w免费人成| 欧美精品亚洲精品日韩精品| 欧美日韩精品在线| 99久久99这里只有免费费精品| 久久93精品国产91久久综合| 四虎精品成人免费观看| 国产AV午夜精品一区二区三区| 亚洲国产一二三精品无码| 精品97国产免费人成视频| 91精品成人免费国产片| 欧美韩国精品另类综合| 国产精品电影在线观看| 国产精品白浆在线观看免费| 色欲久久久天天天综合网精品| 蜜桃麻豆www久久国产精品| 国产精品自在线拍国产第一页 | 亚洲综合国产精品第一页 | 久久国产乱子精品免费女| 日韩人妻无码精品一专区| 中文字幕一精品亚洲无线一区| 欧美成人精品第一区二区| 精品97国产免费人成视频| 国产L精品国产亚洲区久久| 91自慰精品亚洲| 国产精品理论片在线观看| 91久久福利国产成人精品| 丝袜美腿国产精品视频一区| 久久久91精品国产一区二区三区| …久久精品99久久香蕉国产| 91在线视频精品| 九九精品成人免费国产片| 久久亚洲精品中文字幕三区| 久久精品这里热有精品| 99久久亚洲综合精品成人| 国产精品国产三级国产| 国产亚洲精品a在线观看| 狠狠精品干练久久久无码中文字幕| 精品亚洲一区二区三区在线观看| 久久精品国产99国产精品|